Advertisement
Installation
It is important to read the entire user's manual to familiarise with the product before assembling and
using the dolly. Make sure that all parts stated in the parts list and assembly instruction (see below) are
present before assembling and using the dolly.
See parts list for assembly
1.
Fix one side of the middle handle (8) to the axle assembly (1) using the screw (9) and nut (10).
2. Connect the axle assembly (1), the upper handle (14), and middle handle (8) using the screw (9)
and nut (10).
3. Now mount the castor (12) to the castor holder (11) using the screws (9, 13) and nut (10).
4. Mount the ball coupling (7) to the holder (6), then insert the ball holder (6) into the axle assem-
bly (1), and secure it with the safety pin (4) and bolt (5).
5. Mount the two wheels (2) to the axle assembly (1) and secure them using washers (3) and safety
pin (4).
6. Check all fixations and tighten them if necessary.
Exploded view and parts list
© by WilTec Wildanger Technik GmbH
http://www.wiltec.de
Item 62327
Page 4
08 2023-1
Advertisement
