Draining The Condensate - Hisense HDGA80H User's Operation Manual

DRAINING THE CONDENSATE

The moisture from the laundry is extracted in the condenser unit and accumulated in the
condensate tank.
During the drying process, an indicator light (symbol
condensate tank is full and needs to be emptied.
To avoid emptying the condensate tank, run the condensate discharge hose located at the back of
the appliance directly into a drain.
If you decide to run the condensate drain hose into a drain, make sure the hose is securely
fastened. This will prevent any water spillage which could result in unexpected damage.
Always use the hoses supplied with the dryer.
20
(7) is lit on the display unit) warns when the
1 Release the hose
from the holder on
the back wall of the
dryer (left hand side,
below the top cover).
2 Run the hose into
a drain at a height
of no more than 80 cm
from the floor.