Table of Contents
Advertisement
Cleaning the Display
When cleaning the NovoTouch display, please ensure you follow the instructions below
to prevent damage to the display and its panel.
Before you begin cleaning the display, ensure that it is powered off and unplugged
from the power source. Then remove any styluses, pens, or accessories attached to
the display.
Do not use any chemicals on the panels.
Do not use anything abrasive to wipe the display, use a clean soft, lint-free cloth
instead to wipe the display.
Do not spray water directly on the display, fill a spray bottle with water and spray
directly on to the cleaning cloth instead. After wiping the display with the wet cleaning
cloth use another clean soft, lint-free cloth to dry the display.
Make sure all dust, debris, and smudges are removed from the display, ensuring that
the corners and edges are also wiped clean.
When wiping the display use a circular motion as seen in the image below:
Copyright © 2017 Vivitek. Vivitek is a trademark of Delta Electronics, Inc.
NovoTouch User Manual
Page 34
Advertisement
Table of Contents
