Table of Contents
Advertisement
NovoTouch User Manual
Getting Started
Powering the Display
After mounting/installing the NovoTouch in the desired location you must supply power to
the display using the following steps:
1. Plug the supplied power cable into the display and a power source.
NOTE: Only use the power cable provided in the packaging with the display.
2. Turn the power switch located at the bottom of the display on.
3. Press the power button on the display or the remote control to power on the display.
Page 25
Copyright © 2017 Vivitek. Vivitek is a trademark of Delta Electronics, Inc.
Advertisement
Table of Contents
