Creating A Question With A Pull-Down Blank - TI Navigator Reference Manual

Tolerance and Range are very similar, but your choice between these
two fields will probably be based on which one is easier to specify.
For example, if the question is "The value of pi is __" you might
specify 3.14159265 as the correct answer with a Tolerance of .01. If
the response to your question is a range of integers, then using
Range (25 to 27, for example) might be easier.
3. If more than one value is acceptable for the answer, enter a
Tolerance, or enter Range in the Minimum Value and Maximum
Value boxes.
If you want to make the blank longer so that the size of the
blank does not reveal the answer, change Field Length to a larger
number.

Creating a question with a pull-down blank

1. Create a fill in the blank question and complete steps 1 through 4c.
2. In the Response area, click Pull Down.
LearningCheck™ Creator 171