TI-Navigator™ Quick Start
Wireless card communicates
with network hubs.
Network hubs
communicate with
wireless card
Texas Instruments U.S.A.
ti
7800 Banner Dr., Dallas, Texas 75251
http://education.ti.com/support
ti-navigator@ti.com
1-866-TI NAVIGATOR (1-866-846-2844)
Copyright © 2003 Texas Instruments Incorporated
NAV/PO/1L1/A
For detailed instructions, see the Getting Started guide.
Access point connects to
teacher's computer through
USB connector.
TI handhelds connect to hubs.
Unpack the parts
Network hub (4 per student kit, 1
per individual kit)
Charging bay charges
network hubs when
they are not in use.
Charging bay (1 per student kit)
Access point (1)
shown with plastic
cover removed
Ethernet crossover cable (1)
CDs (2, identical)
TI Connectivity Cable USB (1)
Network connector
Hub clamp
(1 per hub)
(1 per hub)
Power adapter (1 per student kit,
1 per individual kit)
All power adapters are identical.
Rubber feet (1 sheet of 4)
Power adapter for access
wireless card (1)
point (1)
All power adapters are
identical.
Network adapter,
USB-to-Ethernet (1)
Getting Started guide
Cradles for TI-83 Plus, TI-83 Plus
Silver Edition, and TI-89 (16 per
student kit, 4 per individual kit)