Table of Contents
Advertisement
Ethernet
crossover cable
plugs in here
3.
Connect the AC9926 power adapter to the power jack on the access
point, but don't plug the power adapter into a power outlet
yet.
4.
Connect the Ethernet crossover cable to the access point.
If your classroom computer has an available Ethernet port, you will use it
to connect to the access point. If not, you will use the network adapter
(USB-to-Ethernet).
Starting the wizard
A First Time Setup screen opens automatically when you complete the
installation of the TI-Navigator™ software. You are immediately
prompted to run the network setup wizard.
Note: If you want to run the Setup Wizard later, you will click
Programs > TI Tools > TI Network Manager
opens, or click
Actions > Setup Wizard
14
. When Network Manager
from the TI-Navigator™ menu.
AC9926 power
adapter plugs in
here
Start >
Advertisement
Table of Contents
