Figure 16
1. Pulley assembly
2. Front hitch
9.
Raise attachment lift lever to the mounting
position; refer to tractor Operator's Manual.
10. Open mid-mount hitch lock handle. Lower
mower with attachment lift and remove front
mounting shaft (Fig. 5).
1
Figure 17
1. Mid-mount hitch
11. Remove hairpin cotter and washer from
attachment lift pin from slot in center lever bar
(Fig. 4).
2
3
1
m–2810
3. Latch
2
m–2825
2. Front mounting shaft
Figure 18
1. Attachment lift
2. Slot-center level bar
12. Turn the front wheels fully to the left and raise
attachment lift lever all the way to the latched
position; refer to tractor Operator's Manual.
Slide the mower out from under the chassis to
the the right side.
Note:
Save all hardware, washers and hairpin
cotters for use when installing deck.
Assembly
1
2
3
4
m–2824
3. Washer
4. Hair pin cotter
9