TIpË 9: Sending and Receiving Data between Calculators
You can send and receive data between calculators using the
To connect two calculators using the unit-to-unit cable, which comes packaged with your
calculator, use the I/O (input/output) port located at the center of the bottom edge of the
calculator.
Insert either end of the unit-to-unit cable into the I/O calculator port.
Insert the other end of the cable into the I/O port of the other calculator.
Tip: The cable must be firmly inserted into the I/O port. If you receive a "link error," make sure the cable is completely inserted.
Sending unit
I/O ports for cable
\
Calculator Keys Used in This _ TIp
_ TIp Highlights
You can send or receive many types of data such as lists, programs, pictures, and applications
that can be shared.
To communicate between two calculators, you must set up one calculator to send the data and
the other calculator to receive the data.
Fundamental Topics in Science
Receiving unit
© 2001 Texas Instruments
TIp 9: Sending and Receiving Data between Calculators
SEND
and
RECEIVE
menus.
TIp 9-1