Advertisement
Operation/Maintenance
NOTE: We strongly recommend that any servicing be performed by an authorized service technician.
Loading Product
• In order to save energy, limit the number of times the lid is opened and the length of time the lid is open.
• Do not place heavy or hot things on top of the freezer; this can damage it.
• Be sure to power the freezer off before cleaning it.
• Use a soft cloth with some moderate detergent and warm water to clean the freezer.
• Use warm water to clean oil or fruit juice stains on the gasket in order to keep its elasticity. Apply some
talcum powder to it to prolong its life.
• The freezer should not be left unused for a long time. If you plan to stop using the freezer, power it off, then
clean the inside and keep the door open for 2-3 days to let it dry.
Attention
• Children should not operate this machine
• Children should not play around this equipment.
• We have the right to change materials and specifications without notice. Please find the specific parameters
on the rated label of the product.
Trouble Shooting
Freezer Keeps Unfreezing
Potential Issue
Temperature control is set to the highest point.
The plug is not properly plugged in.
The fuse is broken off.
Compressor Does Not Shut Off
Potential Issue
Temperature control is set to the lowest point.
There is too much food in the freezer.
There is ice buildup.
The doors are being opened and shut too much.
The freezer is too close to a wall.
The freezer is located too close to a heat source.
Loud Noises
Potential Issue
The freezer is on an uneven surface.
The refrigerating tubes are touching each other.
User Manual
How to Fix
Adjust the temperature.
Make sure the plug is connected properly.
Replace the fuse.
How to Fix
Adjust the temperature.
Remove some food from the freezer.
Defrost the freezer.
Reduce the amount of time the door on the freezer is
opened and shut.
Place the freezer away from the wall (at least 4").
Move the freezer away from the heat source.
How to Fix
Relocate the freezer to a level surface.
Make sure the tubes are not touching each other.
Advertisement
