Advertisement
Installation Manual
7.0 MAINTENANCE
It is important that maintenance checks are recorded and that the
schedule is always adhered to, in all cases, the previous report
should be referred to.
Before commencing work make sure that the unit, switched
live and Nuaire control are electrically isolated from the mains
supply and switched live supply.
7.1 Filters
Filters are to be inspected every 6 months and replaced every
12 months (or sooner if required). Failure to do so may impair
the performance and energy efficiency of this unit. A flashing
LED (Section 6.2) will indicate that a filter change is required. This
indication repeats every 12 months and will turn off automatically
after 5 Days.
Remove the filter covers on the front panel of the unit by gripping
the two circular tabs either end of the filter covers and pulling
away from the unit. The filter can now be extracted by pulling the
black removal loop on the front edge of the filter. Once the filters
have been inspected return or replace them as necessary.
21
Filter Removal
Filter covers
Filter covers
Filter being
Filter being
removed
removed
Filter cover
Filter cover
8.0 WARRANTY
The warranty starts from the day of delivery and includes parts
and labour for the first year. The remaining period covers
replacement parts only.
This warranty is void if the equipment is modified without
authorisation, is incorrectly applied, misused, disassembled, or
not installed, commissioned and maintained in accordance with
the details contained in this manual and general good practice.
The product warranty applies to the UK mainland and in
accordance with Clause 14 of our Conditions of Sale. Customers
purchasing from outside of the UK should contact Nuaire
International Sales office for further details.
Only genuine Nuaire parts and filters may be used to maintain
the unit. Failure to maintain the unit as recommended will
invalidate the warranty.
Nuaire |
Western Industrial Estate
|
|
| nuaire.co.uk
Caerphilly
CF83 1NA
MRXBOXAB-ECO4-SC/SW
9.0 END-OF-LIFE AND RECYCLING
Where possible Nuaire use components which can be largely
recycled when the product reaches its end-of-life:
•Fans, motors, controls, actuators, cabling and other electrical
components can be segregated into WEEE recycling
streams.
•Sheet metal parts, aluminium extrusion, heating/cooling
coils and other metallic items can be segregated and fully
recycled.
•EPP, plastic ducting, nylon corner pieces, plastic heat
exchangers, packaging material and other plastic
components can be segregated into mixed plastic and
widely recycled.
•Cardboard packaging, wood, and other paper components
can be largely recycled or fully processed in energy from
waste centres.
•Filter Disposal: Cardboard framed filters should be fully
processed in energy from waste centres, contact your
local civic amenity site / household waste recycling centre
regarding metal / wire framed filters.
•Remaining Items can be further segregated and processed
in accordance with the zero waste hierarchy. Please call
After Sales Support for further information on items not
listed above.
Ensure that Nuaire product is made safe from any electrical /
water / refrigerant supplies before dismantling commences.
This work should only be undertaken by a qualified person in
accordance with local authority regulations and guidelines,
taking into account all site based risks.
10.0 AFTER SALES AND REPLACEMENT
PARTS
For technical assistance or further product information, including
spare parts and replacement components, please contact the
After Sales Department.
If ordering spares please quote the serial number of the unit
together with the part number, if the part number is not known
please give a full description of the part required. The serial
number will be found on the identification plate attached to the
unit casing.
Telephone 02920 858 400
aftersales@nuaire.co.uk
Technical or commercial considerations may, from time to
time, make it necessary to alter the design, performance and
dimensions of equipment and the right is reserved to make such
changes without prior notice.
11. 09. 23. Document Number 671857
9
Advertisement
