Selecting A Supported Display Mode; Understanding Power Management - Lenovo ThinkCentre Tiny-in-One 24 User Manual

Selecting a supported display mode

Understanding power management

16
ThinkCentre Tiny-in-One 24 User Guide
The display mode that monitor uses is controlled by the computer. Therefore, refer to your
computer documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes. This is
normal and the image can be readjusted using automatic image setup and the image
controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat
Panel technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently
configured to a display mode outside the range of this monitor, you may need to re-attach
the CRT monitor temporarily until you have re-configured the system; preferably to
1920x1080 at 60Hz, which is the Native Resolution Display mode.
The display modes shown below have been optimized at the factory.
Table 2-3.Factory set display modes
Addressability
640x350
640x480
720x400
800x600
1024x768
1152x864
1280x768
1280x800
1280x1024
1366x768
1440x900
1600x1200
1680x1050
1920x1080
Power management is invoked when the computer recognizes that you have not using your
mouse or keyboard for a user-definable period. There are several states as described in the
table below.
For optimal performance, switch off your monitor at the end of each working day, or
whenever you expect to leave it unused for long periods during the day.
Table2-4.Power indicator
State Power Indicator
On Steady green
(AIO Mode/DP)
Blinking green
Standby/
(AIO Mode)
Suspend
Steady amber
(DP)
Off Off
(AIO Mode/DP)
Refresh rate
70Hz
60Hz, 66Hz,72Hz,75Hz
70Hz
60Hz,72Hz,75Hz
60Hz,70Hz,75Hz
75Hz
60Hz
60Hz
60Hz,72Hz,75Hz
60Hz
60Hz, 75Hz
60Hz, 70Hz,75Hz
60Hz
R60Hz
Screen Restoring Operation
Normal
Blank Press a key or move the
mouse.
There may be a slight
delay reappears.
Note: Standby also occurs
if there is no image output to
the monitor.
Off
Press power key to switch on
There may be a slight delay
before the image reappears.
Compliance
ENERGY
STAR
ENERGY
STAR