Table of Contents
Advertisement
cleaning and maintaining your
washer
self clean
Self Clean is a self-cleaning cycle that removes any mold from inside the washing machine.
1. Press the power button.
2. Press the self clean button.
Once you have pressed the Self Clean button,
the only function you can set is the Delay Start
function.
3. Press the start/pause button. The Self Clean+
cycle will start.
The self clean auto alarm function
CAUTION
•
Using Self Clean, you can clean the drum, tub, and diaphragm without using a cleansing
agent.
•
Never use Self Clean when laundry is in the washing machine. It may cause damage to the
laundry or a problem with the washing machine.
•
if you want to use a drum cleansing agent, use only 1/10 of the amount of the drum
cleansing agent recommended by the cleansing agent manufacturer. (When using a
powder type cleansing agent , remove the liquid detergent compartment.)
The self clean auto indicator function
If the "self clean" button is lit after a wash, it
•
indicates that tub (drum) cleaning is required.
In this case, remove the laundry from the
washing machine, turn the power on, and
clean the drum by running Self Clean.
•
If you do not run Self Clean after every 40
washes,the "self clean" indicator turns off
after one hour. However, the "self clean"
indicator will light again after five washes. Not
running Self Clean at this point will not cause
a problem with the washing machine.
•
Although the Self Clean Auto Indicator
appears once a month or so, the frequency
may differ depending on the number of times
the washing machine is used.
WF36J4000AW-02832L_EN.indd 28
28_ English
2015/4/20 9:34:17
Advertisement
Table of Contents
