Connecting Devices; External Device Connection - Sylvania LC260SS2 Owner's Manual

24
CONNECTING
DEVICES
No supplied cables are used with these connections:
• Please purchase the necessary cables at your local store.
Before you connect:
Be sure other device is connected properly before plugging in
the AC power cord.

External Device Connection

HDMI Connection
HDMI connection offers the highest picture quality.
HDMI
(High-Defi nition Multimedia Interface)
digital video and multi-channel digital audio through a single cable.
or
or
HDMI-DVI Connection
Use an HDMI-DVI conversion cable to connect the unit to
external video devices equipped with DVI output jack.
(use HDMI 1 Input jack only and Audio L/R beside HDMI 1
jack on rear of TV)
To HDMI 1 Input
jack only
HDMI-DVI HDMI-DVI
conversion cable conversion cable
transports high defi nition
HDMI cable HDMI cable
HDMI OUT
TITLE 5
CHAPTER 15
REPEAT A-B
BD/DVD recorder BD/DVD recorder
with the HDMI output jack with the HDMI output jack
cable receiver or satellite box cable receiver or satellite box
with the DVI output jack with the DVI output jack
STEREO
PCM
AUDIO OUT
DVI OUT
L R
audio cables audio cables
Note
• Use an HDMI cable with the HDMI logo (a certifi ed HDMI cable).
High Speed HDMI cable is recommended for the better compatibility.
For HDMI connection (use HDMI 1, 2 or 3 Input jack)
• The unit accepts 480i, 480p, 720p, 1080i and 1080p 24/30/60Hz
of video signals, and 32kHz, 44.1kHz and 48kHz of audio signals.
• This unit accepts 5.1 channel audio signal (Dolby Digital) and 2
channel audio signal (LPCM).
• This unit accepts only signals in compliance with EIA861.
For HDMI-DVI connection
• The unit accepts 480i, 480p, 720p, 1080i and 1080p video signals.
• HDMI-DVI connection requires separate audio connections as
well and the audio signals are converted from digital to analog.
• DVI does not display 480i image which is not in compliance with
EIA/CEA-861/861B.
Component Video Connection
Component Video connection offers better picture quality for
video devices connected to the unit.
If you connect to the unit's Component Video Input jacks,
connect Analog Audio cables to the Analog Audio L/R Input
jacks right beside the Component Video connector jacks.
with the component video output jacks with the component video output jacks
component video cables component video cables
(red / blue (red
Note
• The unit accepts 480i / 480p / 720p and 1080i of video signals for
this connection.
S-Video Connection
S-Video connection offers good picture quality for video
devices connected to the unit.
If you connect to the unit's S-Video Input jack, connect audio
cables to the Audio L/R input jacks right above the Composite
Video connector.
BD/DVD recorder BD/DVD recorder
TITLE 5
CHAPTER 15
REPEAT A-B
COMPONENT VIDEO OUT AUDIO OUT
L R
Y Pb/Cb Pr/Cr
(green) (green) (blue) (blue) (red) (red)
/ blue / green) / green)
audio cables audio cables
BD/DVD recorder, camcorder and BD/DVD recorder, camcorder and
VCR with the S-Video output jack VCR with the S-Video output jack
TITLE 5
CHAPTER 15
REPEAT A-B
S-VIDEO
AUDIO OUT
OUT
L R
audio cables audio cables
S-Video cable S-Video cable