Wireless Bluetooth Switch
(BCS03)
Installation Instructions
11/18/2022
11/18/2022
1.0
1.0
Screws
Holder for
Switch
existing switch
SWITCH FUNCTIONALITY
Fixtures can be controlled wirelessly through a remote
Bluetooth switch, which can be wall mounted or remotely
located for convenience.
2
Dim Up
4
ON / OFF
7/28/23 - V1.1
5-KEY
5-KEY
C
C
Holder for
Wall plate
wall switch
1
Sensor ON/OFF:
Work with wired
PIR motion sensor.
3
Dim Down
5
Scene Switch:
Three scenes
selected from
App settings.
WHAT COMES IN THE BOX
Switch
Holder for existing switch
Holder for wall switch
REQUIRED
Two CR2032 batteries
(not included)
ATTENTION
1.
Please check if there is any damage during shipping.
If so, please contact Litetronics customer service.
2.
Please read the installation instruction carefully to
check whether all the accessories are included.
3.
After confirmation, install the switch according to
10.01089
10.01089
installation steps.
Tip: This Bluetooth device is compatible with Litetronics
lighting control system only.
Important: Battery model #CR2032 can be used for 5 years
based on twice a day usage.
Note: Do not use in a metal region or strong,
electromagnetic wave area.
INSTALLATION
1. Battery installation -
2. Wall surface installation -
3. Wireless Bluetooth switch set up -
Note: Install LiteSmart App before setting the switch.
Wall Plate
Screws (2)
Installation Instructions
TOOLS NEEDED
Phillips and flathead screwdriver
Power drill
Page 2
Page 2
Page 3
Page 1/4