AmazonBasics B084XPB4SL Manual page 11

Switching on/off
1. Slide the emergency switch (N) to NORMAL USE position.
2. Switching the product on or off: Press and hold the power button
(H) for 3 seconds.
NOTICES
• The product saves the last used settings, even after interruption of
power supply.
• The product switches off and on at intervals to maintain the
temperature. When the compressor is running, the operating indicator
(J) lights up green.
• During normal operation, the display (K) shows the cooling
compartment's current temperature.
• For best results only store already cooled food/beverages. Select a
place that is protected from a direct sunlight.
Adjust temperature (0 to 50 °F / –18 to +10 °C)
1. Press the settings button SET (I). The cooling temperature flashes.
2. Press the buttons +/– (L) to adjust the cooling temperature.
3. Press the settings button SET (I) 3 times to confirm the setting.
Select temperature unit
1. Press the settings button SET (I) twice. The temperature unit flashes.
2. Press the buttons +/– (L) to toggle between Fahrenheit and Celsius.
3. Press settings button SET (I) twice to confirm the setting.
Vehicle battery protection
NOTICE
To prevent the vehicle battery from being fully discharged,
the product automatically stops operation when the battery voltage drops
below a preset value.
1. Press the settings button SET (I) 3 times. The set battery mode
LO/NE/HI flashes.
2. Press the buttons +/– (L) to toggle between different battery modes.
3. Press settings button SET (I) to confirm the setting.
EN
11