Advertisement
Parts:
1
1.
Air Output Vents
2
2.
Control Panel
3.
Front Display
4. Air Purifier Base
3
5.
Air Intake Vents
6.
Filter
7.
Filter Door
1
2
1. Remove the filter door located on the
2. Take the filter out of the unit and remove
bottom of the air purifier.
packaging, then insert back into the unit.
DO NOT run the air purifier unless
the filter is removed from its packaging
and properly reinstalled.
4
5
8 cm
minimum
4. Set up the unit on a level floor surface,
5. Plug the unit into an electrical outlet
at least 8 cm away from walls and
and press the power button on the top
objects.
control panel.
SETTING UP YOUR UNIT
TIPS FOR SETTING UP YOUR UNIT
• Make sure the front panel of the unit faces away
from the closest wall.
• Do not move the unit while it is running. Turn
off the power and unplug the unit before
moving it.
4
• Make sure the vents are not blocked.
• Do not place anything on the air purifier.
• Do not place the air purifier near heaters or
radiators.
5
• Keep the unit out of direct sunlight and away
from water or other liquid.
• Keep all nearby doors and windows closed
when operating the air purifier.
• Avoid using in very humid environments.
6
7
3
Remove filter
from plastic
packaging
3. With the filter installed, replace the filter
door. Twist the filter door until clicks into
place.
6
6. When the unit is powered on, it will begin
to analyse the air quality indicated by the
rotating lights. After a few seconds the
unit will display the current air quality
and you can customise the settings on
your unit.
Your air purifier is equipped with a control panel on the top of the unit and a display screen on the front of the unit.
TOP CONTROL PANEL
Includes controls that allow you to customise the settings.
FRONT DISPLAY SCREEN
Displays the current air quality status based on the Air Info mode
selected on the top control panel.
The built-in sensor detects your air quality to give you real-time information. Use the AIR INFO button to switch between air quality display
options.
FRONT DISPLAY
INFO
SCREEN
% AIR QUALITY
TIME REMAINING
The PM (particulate matter) value is the amount of particulate in your air, measured in micrograms
PARTICLE SIZES
MAX
(μg) per cubic meter. Your air purifier measures three particle sizes, PM1, PM2.5, and PM10.
PM1
MAX
PM2.5
MAX
PM10
MAX
CONTROL PANEL
MAX
TOP CONTROL PANEL BUTTONS
On/Off: Press to turn the power on or off.
Air Info: Press to switch between air quality display options.
See the Air Info Settings section for more information.
Auto Mode: Press to turn on Auto Mode. In this setting the
MAX
fan speed automatically adjusts based on real time air quality
readings. As the air quality improves, the fan speed will
decrease. If air quality worsens, the fan speed will increase.
Leave your unit in Auto Mode for optimal performance.
Filter Life: Press to show the remaining filter life.
Once the filter has 0% remaining, the FILTER LIFE button
will flash to indicate the filter needs to be changed. See
Installing and Removing the Filter section for more information.
Brightness: Adjusts the brightness of both the front display
MAX
screen and the top control panel. Switch between 3 options:
full brightness, partially dim, fully dim.
Shut-Off Timer: Set the number of hours for the air purifier to
MAX
run before it automatically shuts off. Timer can be set between
1–12 hours.
Fan Speed: Adjusts the speed of the fan. Select one of 4 settings:
1 Low, 2 Medium, 3 High, 4 Maximum. Note: If fan speed is
manually changed, auto mode will be deactivated. For tips on
optimal fan setting, see Optimising Fan Speed section.
Optimise Performance in Eco Mode: After 100% clean air
status is achieved for 10 minutes in Auto Mode, your air purifier
will enter Eco Mode. Your unit's filter life and electricity usage will be
Optimised!
To control your unit's beeping, hold the Air Info and Child Lock
buttons at the same time for two seconds.
AIR INFO SETTINGS
REAL-TIME READING
Displays the air quality rating:
• Poor: 0%–69% • Fair: 70%–84% • Good: 85%–100%
If your unit reads 100% this means your air quality is very good.
Should the air quality drop, the % will adjust accordingly.
Shows the estimated time remaining until reaching air quality rating- Good: 85%-100%
Displays the amount of PM1-sized particles in your air, including viruses and ultra-fine allergens.
Displays the amount of PM2.5-sized particles in your air, including smoke and bacteria.
Displays the amount of PM10-sized particles in your air, including dust, mould, and pollen.
Advertisement
