Layout Of Receiver - Swann SW344-DWD Operating Instructions Manual

Layout of Receiver

Play / Enter
Arrows /
Playback Controls
POWER
MENU
MUTE
QUAD
Auto/Manual
ARM
Power: Activates and deactivates the receiver.
MENU: Opens the main menu, or goes back one step in a submenu.
MUTE: Turns the audio output on or off. Will not affect recording, only live
monitoring and playback.
QUAD: Toggles between single channel view (where the image from one camera
fills the whole screen) and quad view (where all four channels are displayed
simultaneously, each taking 1/4 of the screen).
Auto/Manual: Press to change the channel being displayed in manual switching
mode. Press and hold to toggle between manual switching and auto-switching
mode.
ARM: Turns the motion detection based recording functions on or off. When the
receiver is armed, it will automatically switch to QUAD view. You can subsequently
exit QUAD view without disarming the receiver by pressing the QUAD button. For
more information about recording and recording modes, see page 9.
Play / Enter: Starts and stops footage in playback mode. Acts as a Select / Enter
Arrows / Playback Controls: Used to navigate whilst in the menu system. In live
viewing mode, UP is a shortcut to RECORD. In playback mode, DOWN is a shortcut
to STOP, whilst LEFT and RIGHT are REWIND and FAST-FORWARD respectively.
6 6 6