2030 LCD panel, LCD cable, and hinge assembly
For access, remove these FRUs in order:
• "1170 LCD unit" on page 89
• "2010 LCD bezel assembly" on page 100
• "2020 LED card" on page 100
Removal steps of removing the LCD panel and the LCD cable
1. Grasp the end of two elastic adhesive tapes with tweezers. Pull out each tape slowly in the direction as
shown until two elastic tapes are all released from LCD unit
Note: Do not pull the tapes too fast, otherwise, the tapes might snap.
1
.
.
Chapter 9
Removing or replacing a FRU
101