Advertisement
Table of Contents
®
Aquarion
AQ100
Tools Needed
1.
Flat-head screw driver
Clip Tray Lock
It is recommended that the Aquarion
tube to fully engage the Aquarion
base, see Figure 1.
The clip tray lock is easily removed by taking a flat-head screw driver and prying the clip from the base. See Figure 2.
Doc. No: 01999972M
Revision: A
Issue Date: 08/15/21
INSTALLATION • OPERATION • MAINTENANCE MANUAL
SELF-CONTAINED EYEWASH STATION
PRODUCT MAINTENANCE
®
clip tray lock be removed to allow the tray to open more smoothly and the piercing
®
fluid cartridges. The clips are located where the eye wash tray engages with the shell
(Fig. 1) Location of clip tray locks
(Fig. 2) Use flat-head screw driver to pry off clips.
1 of 2
Advertisement
Table of Contents
Related Manuals for AQUARION AQ100
Summary of Contents for AQUARION AQ100
- Page 1 Tools Needed Flat-head screw driver Clip Tray Lock ® It is recommended that the Aquarion clip tray lock be removed to allow the tray to open more smoothly and the piercing ® tube to fully engage the Aquarion fluid cartridges. The clips are located where the eye wash tray engages with the shell base, see Figure 1.
- Page 2 PROPOSITION 65 WARNING: This product can expose you to BPA, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. WARRANTY STATEMENT ENCON HEREBY DISCLAIMS ALL WARRANTIES EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD-PARTY RIGHTS, EXCEPT AS HEREINAFTER PROVIDED.
Need help?
Do you have a question about the AQ100 and is the answer not in the manual?
Questions and answers