Advertisement
6.3.
UNIVERSAL ADAPTORS
6.3.1.
Universal adapters can be fitted to brake or clutch master cylinder fluid reservoirs using the universal adapter clamps, the two hook
bolts and chains. Wrap the chain around the brake or clutch master cylinder and locate through the two holes in the adaptor and the
two slots in the clamp, take out the slack in the chain using the nuts and then tighten the clamp to seal the adaptor to the master
cylinder (fig.6).
7. MAINTENANCE
7.1.
Ensure that the unit is de-pressurized before carrying out any maintenance and drain all fluids from the main tank and from the fluid
supply tube.
7.2.
Clean up any spilled brake fluid and wipe down with a clean cloth.
7.3.
Store in a clean, dry and childproof location.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call
our technical team on technical@sealey.co.uk or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
Fig.6
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
VS0204.V5 Issue 2 (2) 16/09/20
Advertisement
