Matelec FPC-12670 Operation Manual

OPERATION MANUAL
Liquid Level Alarm
Deluxe - Metal Enclosure - FPC-12670

Introduction

MATelec Australia's Liquid Level Alarm is designed to provide warning indication and alarm when a water storage tank is either empty
or full. Housed in a robust powder coated metal enclosure, the Metal Enclosure version features audible and visual alarms and a
keypad interface with status indicator lights and alarm mute button.

Safety

This Liquid Level Alarm panel has been designed and built for applications that are Commercial and/or Industrial in nature, operation,
function and location. If the control panel is to be used in Domestic/Residential applications, further consideration is required by the
installer to ensure its suitability. It is the responsibility of the installing electrician to ensure compliance with relevant standards.
• Prior to installation, ensure power supply is isolated.
• Electrical connection to the panel must be carried out in accordance with the following pages.
• Additions or modifications to the control panel are not permitted and will void warranty.
• The controller is not intended for use by children or infirm persons without supervision.
• Repairs to the controller must only be carried out by a suitably qualified electrician.
This operation manual makes use of the following symbols to indicate warnings that must be paid specific attention to:
Damage to equipment or personal harm may occur if this instruction is not followed
Electrical risk (electrocution hazard) may occur if this instruction is not followed
1
P: 1800 281 282 | F: 1300 281 282 | E: info@matelecaustralia.com.au | W: www.matelecaustralia.com.au
V1.1