Dell NOT22104 Owner's Manual page 95

Table 33. System setup options—Power menu (continued)
Power
Thermal Management
Block Sleep
Lid Switch
Enable Lid Switch
Power On Lid Open
Intel Speed Shift Technology
Table 34. System setup options—Security menu
Security
Intel Platform Trust Technology
Intel Platform Trust Technology On
PPI Bypass for Clear Commands
Clear
SMM Security Mitigation
Data Wipe on Next Boot
Start Data Wipe
Absolute
94 BIOS setup
If enabled, use the Beginning of Day and Work Period sections to configure the
daily times and work periods.
Enables to cool the fan and processor heat management to adjust the system
performance, noise, and temperature.
By default, the Optimized option is selected.
Enables to block entering Sleep (S3) mode in the operating system.
Default: OFF
Enables or disables the Lid Switch
Default: ON
When enabled, allows the system to power up from the off state whenever the
lid is opened.
Default: ON
Enable or disable the Intel Speed Shift Technology support.
Default: ON
Enables or disables Intel Platform Trust Technology visibility to operating
system.
Default: ON
Controls the TPM Physical Presence Interface (PPI).
By default, this option is disabled.
Enables to clear the PTT owner information and returns the PTT to the default
state.
By default, tthis option is disabled.
Enables or disables additional UEFI SMM Security Mitigation protections.
Default: ON
Enables or disables the data wipe on next boot.
Default: OFF
Enables, disables, or permanently disables the BIOS module interface of the
optional Absolute Persistence Module service from Absolute Software.
By default, the Enable Absolute option is selected.
WARNING: The 'Permanently Disable Absolute' option can only be
selected once. When 'Permanently Disable Absolute' is selected,
Absolute Persistence cannot be re-enabled. No further changes to
the Enable/Disable states are allowed.
NOTE: The Enable/Disable options are unavailable while Computrace is in
the activated state.