Mounting And Demounting; Attach Lens; Mount Lens - Beckhoff VOS2000-0625 Manual

4

Mounting and demounting

4.1

Attach lens

The lens can be attached to cameras with C-mount connection.
1. Turn off the camera.
2. Remove the housing cover from the camera.
3. Remove the rear lens cap from the lens.
4. Place the thread of the lens on the C-mount camera.
5. Turn the lens clockwise until it is firmly seated.
Fig. 5: Attach lens
6. Remove the front lens cap from the lens.
ð The lens is now firmly attached to the camera and ready for use.
4.2

Mount lens

For example, the lens can be additionally fixed for high vibration applications.
ü A wrench is required. The recommended torque is 100 N * cm and the maximum torque is 150 N * cm.
1. Place the wrench on the edges of the "Beckhoff" ring.
2. To tighten the lens, turn the "Beckhoff" ring clockwise.
Fig. 6: Tighten lens
VOS2000-0625 Version: 1.0
Mounting and demounting
17