Advertisement
Available languages
Available languages
Creating Your Personal Alarm Code
The keypad allows you to set a
personal 4-digit code for arming and
disarming the alarm.
1. Remove screw from battery
compartment door located on
back of the unit. Slide off the door
in the direction of the arrow.
2. Press the LEARN button.
3. The red light on the front of the
alarm will blinkfor 15 seconds.
During this time, input your 4-digit
code. A beep will confirm each
input. The unit will flash a green
light 3 times to confirm the new
4-digit code has been saved.
4. Replace cover and
secure screw.
5
Learn
button
LEARN
Advertisement
