morse 201BVS-1 Operator's Manual

Belted portable drum rollers

Advertisement

The Specialist In Drum Handling Equipment
Contents

Receiving Procedures. . . . . . . . . . . . . . . . . . . .

Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Safety Information. . . . . . . . . . . . . . . . . . . . .
Machine Description. . . . . . . . . . . . . . . . . . .
Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating Instructions. . . . . . . . . . . . . . . . . . .
Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . .
Receiving Procedures
Every Morse drum handler is inspected prior to shipping. However,
damage may be incurred during transit.
Check for visible damage. If you choose to accept damaged
freight, always sign noting the damage on the Bill of
Lading.
Document the damage and have the truck driver sign. We
recommend keeping a digital camera at your receiving dock
for this purpose.
Open packages expeditiously to check the condition of the
goods. There is only a 24 hour window to notify the carrier
of any concealed damage.
Immediately
report all damage to the shipping company!
Then you may contact Morse for assistance with your
freight claim.
Morse Manufacturing will not be held responsible for any
damaged freight that is not signed for as damaged.
Limited 2 Year Warranty
Morse drum handling equipment is guaranteed against defects in
workmanship or materials for two years when used properly within
its rated capacity. Warranty does not cover wear from normal use or
damage from accident or abuse. Motors and other purchased parts
carry the warranties of their manufacturers.
For warranty claims, contact your Morse Dealer to obtain a
return authorization number, and for return freight advice. Return
freight must be prepaid.
In all instances, liability is limited to the purchase price paid or to
repairing or replacing the product. Customer assumes liability for
any modifications, unauthorized repairs or parts substitution.
MORSE MFG. CO., INC.
Phone: 315-437-8475
Copyright 2016 - Morse Mfg. Co., Inc.
727 West Manlius Street
Fax: 315-437-1029
Form OM201B (010116-______) (Updated December 2, 2015 2:02 PM)
201B Series
Belted Portable Drum Rollers
Operator's Manual
for Morse
Page
Belted Portable Drum Rollers
1
1
201B Series
1 - 2
with Serial Number 010116 to ______
3
3
3 - 4
4
4
Safety Information
While Morse Manufacturing Co. drum handling equipment is
engineered for safety and efficiency, a high degree of responsibility
must be placed upon the machine operator to follow safe practices,
based primarily on common sense, upon which true safety
depends.
Failure to follow the safety precautions in this manual can result in
personal injury or property damage. Observe the same precautions
as with similar machinery where carelessness in operating or
maintenance is hazardous to personnel. Carefully read the safety
precautions below and throughout this manual.
Review the Material Safety Data Sheet(s) for the material(s) in
the drum(s) and take all necessary precautions. Safety shoes,
work gloves, hard hat and other personal protective devices are
recommended.
Prior to initial use, inspect all moving parts and test rotation of belts.
Perform necessary inspections, operator training, etc.
P.O. Box 518
Email:
service@Morsedrum.com
East Syracuse, NY 13057-0518
Webpage:
morsedrum.com
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 201BVS-1 and is the answer not in the manual?

Questions and answers

Summary of Contents for morse 201BVS-1

  • Page 1 Maintenance......Receiving Procedures Every Morse drum handler is inspected prior to shipping. However, damage may be incurred during transit.
  • Page 2 CAUTION - DO NOT allow drum to impact on floor, ground, etc. CAUTION - Install Morse Rollers in accordance with OSHA requirements for enclosure and interlock, etc. For OSHA compliance, see OSHA subpart O.1910.212 “General Requirements for all Machines.” Power connections and motor controls must comply with applicable codes. morsedrum.com Copyright 2016 - Morse Mfg.
  • Page 3 Read operating instructions and review the pictures in the sales brochure before operation. Morse Rollers do not comply with OSHA unless they are installed in accordance with OSHA subpart O, 1910.212 - “General requirements for all machines.” Morse Rollers should be installed in accordance with OSHA requirements for enclosure and interlock, etc.
  • Page 4 201B Series Belted Portable Drum Rollers The Specialist In Drum Handling Equipment Operator’s Manual for Morse 201B Series Portable Drum Rollers Serial Number 010116 to ______ Operating Instructions Position Roller in front of drum to be rotated. Tip Roller forward towards drum until almost vertical. Lower kickstand so unit stands by itself.

This manual is also suitable for:

201b series201bvs-a

Table of Contents