2. Turn the adjusting wheel (1).
3. Push the adjusting wheel (1) down in arrow direction (5).
The adjusting wheel (1) is locked
4.13.2
The photocell identifies the deviation of the fabric contour from the ideal
contour and regulates, if necessary, the speed of the puller.
Puller speed
• Puller faster: increase the value if the workpiece curls at the edge
• Puller slower: reduce the value if the workpiece is pushed away from
The basic speed of the puller can be altered via the input field.
Information
You can use the seam-specific parameters on the control panel ( p. 66)
to program the puller.
4.13.3
The outfeed roller transports the trousers part on the worktable from
the sewing head to the stacker.
Information
You can use the seam-specific parameters on the control panel ( p. 67)
to program the roll-out device/outfeed roller.
4.14 Sewing
50
• More pressure: Turn clockwise
• Less pressure: Turn counterclockwise
Operating the puller
guide.
the edge guide.
Operating the roll-out device
WARNING
Risk of injury from sharp and moving parts!
Puncture or crushing possible.
Only qualified specialists may operate the machine.
Operating Instructions 1265-7 - 01.0 - 07/2023
Operation