Advertisement
Installation
Mounting 4/4
Tighten the four screws on the
pendant cap with the provided T30
Note
Security Wrench.
The status LED will turn orange to
indicate the camera has power. The
LED will turn blue to indicate the
camera is active. See additional LED
states and definitions in the 'LED
Behaviors' section.
For easy registration and setup, scan
the QR code on the product. If you
prefer to manually register your
product, please proceed to:
verkada.com/start
8
Verkada Inc. 406 E. 3rd Ave, San Mateo, CA 94401
sales@verkada.com
All specifications are subject to change without notice
Copyright © 2023 Verkada Inc. All rights reserved.
Advertisement
