Download Print this page

Fired Up Corporation OKO S1 Installation Manual

Bio ethanol stove

Hide thumbs Also See for OKO S1:

B I O E T H A N O L S T O V E

This guide is to be used in conjunction with the

manual supplied with the stove

This manual is for the following models:

OKO S1

OKO S2

BEF0014 (S1)

BEF0014 (S2)

Please read through the use & care manual provided with this product first.

www.firedupcorporation.com/manual

Table of Contents

Need help?

Do you have a question about the OKO S1 and is the answer not in the manual?

Page 1 B I O E T H A N O L S T O V E This guide is to be used in conjunction with the manual supplied with the stove This manual is for the following models: OKO S1 OKO S2 BEF0014 (S1) BEF0014 (S2) Please read through the use &...
Page 2 DISTANCES FROM WALL Distance from A. • Marble/Stone: > 5mm • Wood (including MDF & MFC): > 10mm • Wallpaper: > 100mm OPENING THE DOOR 1.To open the door, turn the handle 2. Once in position, pull the door anti-clockwise to a horizontal to open.
Page 3 IMPORTANT FITTING THE STOVE PIPE (if applicable) ONLY COMPATIBLE WITH ADAM STRAIGHT OR ANGLED STOVE PIPES Parts Supplied 2 x Metal Plates *Images for illustrative purposes only Assemble the stove pipe insert into an ‘X’ and push into the bottom of the stove pipe. Place the stove pipe on top of the stove and push the stove pipe against the wall/back panel.
Page 4 FITTING THE LOG STORE (supplied separately) *Images for illustrative purposes only For products with feet only. For products without feet, move straight to Step 2. NOTE: REMOVE THE BURNER BEFORE LAYING THE STOVE ON ITS BACK Lay the stove on its back and remove the 4 x feet from the stove using a screwdriver.

Oko s2