Advertisement

Quick Links

MULTICOLOR
CAR SOUND MIXER
The installation of this product must be made by a qualified professional.

Advertisement

Table of Contents
loading

Summary of Contents for Taramps T 0302 FX

  • Page 1 MULTICOLOR CAR SOUND MIXER The installation of this product must be made by a qualified professional.
  • Page 2: Term Of Warranty

    12 • Technical features Term of warranty TARAMPS, located on Abilio Daguano Street 274, Res. Manoel Martins – Alfredo Marcondes, SP - Brazil, ZIP CODE 19180-000, guarantees this product against any defects on terms of project, making, assembling, and/or with solidarity, due to project vices which cause it improper or inadequate to its original use within 12 months from the date of purchase.
  • Page 3: Safety Requirements

    Failure to heed the instructions will result in risk of injury to user or product damage. Taramps reserves the right to modify the contents of this document at any time without prior notice and does not have the obligation to apply the changes in units which were previously produced.
  • Page 4: Important Recommendations

    Presentation The T 0302 FX MULTICOLOR mixer was designed for sound systems allowing the mixing of several types of audio signals with high delity, ensuring the original dynamics of the sound. It features a 4-band equalizer that allows you to increase or reduce speci c ranges of mid-bass and highs, allowing for a professional control in any situation.
  • Page 5: Product Overview

    Product overview On this page you have an overview of the T 0302 FX MULTICOLOR sound mixer, you will better understand the commands on the next page. To be able to use all the product commands, carefully read all the commands below.
  • Page 6 Connections IN - Inputs MIC / LINE Balanced inputs for XLR (Canon) and TRS connectors. ATTENTION: these inputs DO NOT HAVE PHANTON POWER. LINE Unbalanced inputs Inputs for RCA or (TRS 1/4”) connector. They allow you to receive signals from several types of sound gear such as CD/DVD/MP3-player, audio processors, etc... with high level outputs.
  • Page 7 Functions Controls Adjusts the input signal level. It must be used in case of input saturation, signaled by the CLIP LEDs. Increases or reduces treble by up to ±15dB Increases or reduces mid-high by up to ±15dB Increases or reduces mid-low by up to ±15dB Increases or reduces Low by up to ±15dB Regulates the amount of effect that will be applied to the ECHO FX...
  • Page 8 RGB EFFECTS The T 0302 FX MULTICOLOR sound mixer has several lighting effects that can be chosen by the user. There are two operating modes that alternate depending on the state of the table: STANDBY MODE: activated when there is no audio output for 10 seconds. At this moment, the RGB EFFECTS button will set the lighting effect to standby mode.
  • Page 9 AUDIO EFFECTS TABLE turns off all RGB effect LEDs vu-meter: green background, scale from green to red vu-meter: green background, scale from blue to green vu-meter: white background, range from green to purple vu-meter: blue background, scale from blue to red vu-meter: green background, scale from green to red VU-meter: purple background, green/yellow/red scale.
  • Page 10: Installation

    Power and activation The T 0302 FX MULTICOLOR was designed to be used in car audio systems with a 12V battery, but it can also be used with an external 12V plug adapter with a current of at least 2A, which must be purchased separately (in this case, the consumer should pay attention to the adapter plug that should be standard P4-2mm) .
  • Page 11: Connection Examples

    Installation Connection examples - 1 Head unit Microphone Acessory Amplifier 1 Amplifier 2 Illustrative Images...
  • Page 12 Installation Connection examples - 2 Head unit Microphone Sound system 1 Sound system 1 Illustrative Images...
  • Page 13: Technical Features

    0.82Kg (1.80lb) Weight: * The consumption of T 0302 FX MULTICOLOR may vary according to the effect used. Taramps reserves the right to modify the content of this manual without prior notice and without any obligation to apply the modi cations to previously produced units.
  • Page 14 Manufactured by: TARAMPS ELECTRONICS LTDA TAX ID: 11.273.485/0001-03 Street: João Silvério, 121 • Res. Manoel Martins Alfredo Marcondes - SP Made in Brazil...

Table of Contents