Quick Reference - Supermicro X7DAL-E User Manual

Quick Reference (X7DAL-E)
Jumper Description
JBT1 CMOS Clear
JI 2 C1/JI 2 C2
SMB to PCI Slot#1/Slot#2 Speed
JPAC Audio Enable
JPF PWR Force-On
JPL1/ JPL2 GLAN1/GLAN2 Enable
JPWF (JP3) PWR Supply Failure Detect
JWD (J19) Watch Dog
Connector
ATX PWR (JPW1)
CPU PWR/PCI-E PWR
Alarm Reset (JAR)
Audio (JC1/JC2)
Aux.-In (AUX)/CD-In (CD1)Audio Aux-In, CD-In
Buzzer
Chassis Intru.(JL1)
COM1/COM2 (JCOM1/3) COM1/COM2 Serial Port Connectors
DIMM#1A-#2B, #3A, #4A Memory DDRII Fully Buffered DIMM Slots
FAN 1-6
Floppy (J22)
FP Audio (J8)
FP Control (JF1)
IDE1 (JIDE1)
Keyboard/Mouse (JKM1) Keyboard/Mouse Connectors
LAN 1/2 (JLAN1/2)
Printer (J21)
PWR LED/SPKR (JD1)
2
PWR SMB (JPI C)
I-SATA0-SATA5 (JS1-JS6)Intel SATA 0-5 Connectors
SGPIO1/2
Slot#0 (PCI-U)
Slot#1 (J6)/Slot#5 (J11)
Slot#2 (J13)/Slot#3 (J12) PCI-X 133MHz Slots
Slot#4 (J9)/Slot#6 (J5)
SMB (J18)
USB 0/1/2/3 (JUSB3)
USB 4/5/6/7 (JUSB1/2)
WOL (JWOL1)
WOR (JWOR)
LED Indicator
D31(*Note 4 on Pg. 1-4) Status LED (*See Chapter 2)
LE1
LE2/LE3 (*Note 5 on 1-4) CPU1 VRM Overheat(LE2)/CPU2 VRM Overheat (LE3)
LE4/LE5
(*See Chpapter 2 for details)
Description
Primary 24-Pin ATX PWR Connector
+12V 8-pin CPU PWR(JPW3)/+12V 4-pin PCI-Express
PWR (JPW2)
Alarm Reset (JP5) Header
Audio Microphone (JC1), Line-In/Line-Out (JC2)
Internal Speaker
Chassis Intrusion Header
Fans 1-6: System cooling fans, chassis fans, CPU fans
Floppy Disk Drive Connector
Front Panel Audio Connector
Front Control Panel Connector
IDE1 Hard Drive
G-bit LAN Ethernet Ports
Parallel (Printer) Port
Power LED(pins1-3)/SpeakerHeader (pins 4-7)
Power System Management (I
Serial General Purpose Input/Output Headers
PCI-E x8 Slot
PCI 33MHz Slots
PCI-Exp.x4 on x16 Slot (Slot#4)/PCI-Exp. x16 (Slot#6)
System Management Bus Header
Back Panel USB 0/1/2/3
Front Panel USB 4/5 (JUSB1)/FPUSB 6/7 (JUSB2)
Wake-on-LAN Header
Wake-on-Ring Header
Description
Power LED
POST LED Indicators (*See Chapter 2)
1-5
Chapter 1: Introduction
Default Setting
See Chapter 2
Pins 2-3 (Disabled)
Pins 1-2 (Enabled)
Off (Normal)
Pins 1-2 (Enabled)
Off (Disabled)
Pins 1-2 (Reset)
2
C) Header