Engine - McCulloch Rider 11 Workshop Manual

Design and function
The transmission's serial number is stated on the
barcode decal located on the front of the housing
on the left-hand drive axle:
• The type designation is stated above the
barcode and starts with the letter "K".
• The serial number is stated above the barcode
and has the prefix "s/n".
• The manufacturer's type number is stated under
the barcode and has the prefix "p/n".
State the type designation and serial number when
ordering spare parts.

Engine

These Husqvarna Riders have single-cylinder, air-
cooled engines from Briggs & Stratton.
More intricate engine repairs are not described in
this workshop handbook, these can instead be
read in Briggs & Stratton's own handbooks which
contain detailed information about adjusting and
repairing the engines. The handbooks can be
ordered from an authorized service workshop.
Rider 11 and Rider 13 have a single-cylinder side
valve engine with spray lubrication with power
outputs of 10.5 and 12.5 hp respectively.
Rider 16 has a 15.5 hp single-cylinder overhead
valve engine.
16
– English
The order numbers for the respective Rider models
are found in the table below. Please state these
when ordering manuals:
Model
Rider 11
Rider 13
Rider 16
It is important that only original spare parts are
used when repairing the engines. If other parts are
used, the guarantee shall no longer be valid.
B & S model no.
28B707
286707
28N707