Triton Products LB18-SKit Installation & Assembly Instructions

LB18-SKit - (2) 18" x 36" Stainless Steel LocBoard®(s)
Read all instructions completely before installing. Should you have any questions about your installation,
•
Boards can be positioned side by side or in separate locations in vertical or horizontal mounting
positions.
•
LocBoards fasten directly to concrete, solid wood and hollow wall structures without the use of furring
strips.
•
LocBoards are designed with internal mounting flanges that keep mounting hardware hidden from sight
and adds to the board's structural integrity and holding power.
•
If installing to bare studs you will need to install wood headers before completing installation.
•
Mounting hardware is included to complete your installation.
Report Any Missing Parts and/or Damaged Goods within 5 Days from Receipt
QTY Description
(3) 1" Single Rod 30 Degree Stainless LH
(6) 3" Single Rod 30 Degree Stainless LH
(3) 6" Single Rod 90 Degree Stainless LH
(3) 4" Double Rod 90 Degree Stainless LH
(3) ¾"-1 ¼" SS LH Ext Spring Clip
(3) 1"-2" SS LH Ext Spring Clip
(3) 1/4"-1/2" SS LH Standard Spring Clip
(3) 2-1/4"L Curved SS LocHook
(1) 8-1/8" SS LH Multi-Prong Holder
(1) 9" SS LH Multi-Ring Tool Holder
(2) 18" x 36" Stainless Steel LocBoards
(3) SS BinClips for LocBoard
(3) Black Bins
(12) Each #8- 2" Stainless Steel Screws and #8 plastic wall anchors.
Level, Marker, 7/32" standard or Masonry Drill bit, 7/64" Std. Bit for wood studs, #2 Phillips Head
Screwdriver, and a power drill.
For Drywall, Hollow Concrete Wall installation: Use (12 each) plastic drywall anchors and #8 Phillips head
stainless steel screws (SUPPLIED WITH THIS SYSTEM). If installing to bare studs you will need to install
wood headers before completing installation using wood screws only. NOTE: Always install 1 board at a
time.
1. Select wall location for your LocBoards and the desired vertical or horizontal mounting pattern you wish
to mount in. When selecting a location for mounting always make sure that mounting locations do not
fall in line with, are adjacent to, or interfere with any internal or external electrical wiring, wall mounted
or built-in electrical appliances, heaters, gas lines, ductwork or plumbing inside of wall, or are located on
the opposite side of any wall surface from where you are mounting. If you are unsure, please consult a
professional before proceeding with installation.
2. (Using Images on Back) There are three screw holes in each mounting flange on the back of your
LocBoard that are accessible through the square holes on the front.
30700 D Carter Street ∙ Solon, OH 44139 ∙ (P) 440.248.5480 ∙
For a full line of products visit
Installation & Assembly Instructions
please call Customer Service at 440-248-5480

Tools needed for Installation

LocBoard Installation:

Please contact Customer Service with any questions at:
www.tritonproducts.com
support@tritonproducts.com
1