Product Overview; Operation; Freewheeling Or Using The Self-Propel Drive - Toro 38810 Operator's Manual

Product Overview

Figure 14
1. Hand-grip (2)
2. Auger/impeller lever
3. Speed selector lever
4. Quick lever discharge
chute control
5. Traction lever
6. Fuel tank cap
7. Engine oil fill tube/dipstick 15. Electric starter plug
8. Chute deflector trigger
g018888
Figure 15
1. Choke
2. Ignition switch
3. Fuel shutoff valve
4. Throttle
g018896
9. Chute deflector
10. Discharge chute
11. Scraper
12. Auger
13. Skid (2)
14. Electric starter button
16. Snow cleanout tool
5. Recoil starter
6. Oil drain plug
7. Primer
1. Snow cleanout tool (attached to the handle)

Operation

Note: Determine the left and right sides of the machine
from the normal operating position.
Freewheeling or Using the
Self-propel Drive
You can operate the snowthrower with the self-propel feature
engaged or disengaged (freewheeling).
To freewheel, insert the axle pins through the axle holes, but
not through the wheel hubs (Figure 17).
g019015
To self-propel, insert the axle pins through the holes in the
wheel hubs and the inner axle holes (Figure 18).
g019014
13
Figure 16
Figure 17
Figure 18