Advertisement
ALARM MODE selector
The CD button has a tactile dot.
There is a tactile dot beside volume to show
the direction to turn up the volume.
CD/RADIO
indicator
NAP indicator
Downloaded from:
https://www.usersmanualguide.com/
Cha nging t he
Bright ne ss of t he
Cloc k displa y
Press BRIGHTNESS to select high or low for the
display according to your preferences.
Se t t ing t he Cloc k
1
Plug in the unit.
The display will flash "AM 12:00".
2
Press CLOCK for a few seconds.
You will hear a beep and the hour will start to
flash in the display.
3
Press TIME SET + or – until the correct
hour appears in the display.
4
Press CLOCK once.
AC power cord
5
Repeat steps 3 and 4 to set the minute.
After setting the minute, press CLOCK to start
the counting of the seconds, and you will hear two
short beeps.
• To set the current time rapidly, hold down TIME
SET + or – .
FM wire antenna
• In step 5, when you press CLOCK after the minute
setting to activate the clock, the seconds start
counting from zero.
Pla ying a CD
An 8 cm (3-inch) CD can be played without an
adaptor.
1
Push OPEN/CLOSE to open the CD
compartment lid and place a disc.
2
Close the CD compartment lid.
3
Press CD u.
The CD/RADIO indicator lights up and "TRACK
01" appears in the display to indicate that track 1
of the CD is playing.
After you press CD u, it takes about 10
seconds before the music starts.
The indication in the display returns to the
current time after about 4 seconds.
4
Turn VOLUME to adjust the volume.
To
Pause
Resume play after pause
Locate the beginning of
the current track (AMS*)
Locate the next track
(AMS)
Go back at high speed
Go forward at high speed
Locate the previous track
(AMS)
Locate the succeeding
track (AMS)
Stop play
* AMS = Automatic Music Sensor
**These operations are possible during both play and
pause.
• During CD playback, every time you press
CLOCK/TRACK, the current time and the track
number appear in the display alternately.
About CD-Rs/CD-RWs
This unit is compatible with CD-Rs/CD-RWs but
playback capability may vary depending on the
quality of the disc,the recording device and
application software.
Music discs encoded with
copyright protection
technologies
This product is designed to play back discs that
conform to the Compact Disc (CD) standard.
Recently, various music discs encoded with copyright
protection technologies are marketed by some record
companies. Please be aware that among those discs,
there are some that do not conform to the CD standard
and may not be playable by this product.
To handle compact discs
Correct
Handle the disc by its edge.
Incorrect
Do not touch the surface.
Do not stick paper or tape nor
write anything on the
surface.
Notes
• Discs with non-standard shapes (e.g., heart, square,
star) cannot be played on this unit. Attempting to do
so may damage the unit. Do not use such discs.
• If you press CD u when there is no disc in the CD
compartment, "00" flashes for about 5 seconds on
the display and the unit turns off automatically.
Va rious M ode s of CD
Pla yba c k
You can play tracks repeatedly or in random order.
Slide CD PLAY MODE.
As you slide CD PLAY MODE, the play mode
changes as follows:
Legend on CD
PLAY MODE
Play mode
"NORMAL"
(normal play)
All the tracks are played once.
Push
"REPEAT"
(all repeat)
All the tracks are played repeatedly.
"SHUFFLE"
(shuffle play)
All the tracks are played once in random order.
"SHUFFLE REPEAT" (shuffle repeat)
All the tracks are played repeatedly in random order.
Labeled surface up
Pla ying t he Ra dio
1
Press RADIO•ON to turn on the radio.
The "CD/RADIO" indication will light up.
2
Adjust VOLUME.
3
Select the BAND.
4
Close the lid
Tune in a station using the TUNING dial.
• To turn off the radio, press OFF x • ALARM
RESET.
Improving the reception
FM : Extend the FM wire antenna to improve
reception.
AM : Rotate the unit horizontally for optimum
reception. A ferrite bar antenna is built into the
unit.
Do not operate the unit over a steel desk or metal
surface, as this may lead to interference of
receptoin.
Press
Se t t ing t he Ala rm
CD u
CD u again
This clock radio is equipped with 3 alarm modes—
.**
CD, radio and buzzer. Before setting the alarm, make
sure to set the clock (see "Setting the Clock"). This
unit is also equipped with a dual alarm function. You
>**
can set the alarm for two different times ALARM
SET A and ALARM SET B.
Hold down .**
Hold down >**
To Se t t he Ala rm T im e
. repeatedly**
1
If you will select the CD alarm or radio
> repeatedly**
alarm, adjust the volume.Also, if you will
select the radio alarm, tune in to the desired
OFF x
station.
2
Set the ALARM MODE selector to CD,
RADIO or BUZZER. The ALARM A or
ALARM B indicator lights up.
3
Press ALARM SET A or ALARM SET B
for a few seconds. The ALARM A or
ALARM B indicator flashes, depending on
which one you set.
After one beep, the hour will start to flash in the
display.
4
Press TIME SET + or – until the desired
hour appears.
To set the hour rapidly, hold down TIME SET +
or –.
5
Press ALARM SET.
The minute will flash.
6
Repeat step 4 to set the minute and press
ALARM SET.
The wake-up track number flashes on the
display.
7
IF you selected the CD alarm, press TIME
Se t t ing t he Sle e p
SET + or – select the desired wake-up
track number.
T im e r
The wake-up track number can be set up to 99.
Its default value is "01".
You can fall asleep to the radio or CD using the built-
8
Press ALARM SET.
in sleep timer that turns off the CD or the radio
Two short beeps confirms the setting, and the
automatically after a preset duration.
ALARM A or ALARM B indicator
Press SLEEP during CD or radio play.
lights up.
You can set the sleep timer to durations of 90, 60, 30,
or 15 minutes. Every push changes the display as
For the CD alarm, the track you specified as the
follows:
Wake-up track is played first.
(If the CD play mode is set to "SHUFFLE" or
OFF(current time)
"SHUFFLE REPEAT", however, all the tracks are
played in random order.)
The CD or the radio will play for the time you set,
To Che c k t he Ala rm T im e
then shut off.
Press ALARM SET A or ALARM SET B. The
• To turn off the CD or radio before the preset time,
display shows the alarm time.
press SNOOZE/SLEEP OFF.
If you press ALARM SET A or ALARM SET B
again, the indication changes to the wake-up track
number . After a few seconds, the display returns to
the current time.
To U se Bot h t he Sle e p
• Alarm time in CD alarm, radio alarm and buzzer
T im e r a nd t he Ala rm
alarm is set at PM 12:00 when you purchased the
unit.
You can fall asleep to the CD or the radio and be
awakened by the CD, radio or buzzer alarm.
1
Set the alarm. (See "Setting the Alarm".)
ALARM ON
2
Set the sleep timer. (See "Setting the Sleep
For the CD alarm, the track you specified as the
Timer".)
Wake-up track is played first. (If the CD play mode is
set to "SHUFFLE" or "SHUFFLE REPEAT",
however, all the tracks are played in random order.)
If you set the CD alarm when there is no disc in the
CD player or the CD compartment lid is open, the
buzzer alarm will sound at the set time.
For the radio alarm, the station that the tuning dial is
set to will be received.
For the buzzer alarm, the beeping of the alarm
becomes more rapid after every few seconds in three
progressive stages.
Note
When ALARM A and ALARM B are set for the same
time, only ALARM A will result.
To Doze for a Fe w M ore
M inut e s
Press SNOOZE/SLEEP OFF.
The CD, radio or buzzer alarm turns off but will be
automatically activated again after about 10 minutes.
Every time you press SNOOZE/SLEEP OFF, the
snooze time changes as follows:
10
20
30
60
40
50
The display shows the snooze time for a few seconds
and returns to show the current time. When you press
SNOOZE/SLEEP OFF after the current time
appeared, the snooze time starts from 10 minutes
again.
• The maximum length of the snooze time is 60
minutes.
ALARM OFF
The alarm is turned off automatically after 60
minutes.
To St op t he Ala rm
Press OFF x • ALARM RESET to turn off
the alarm.
The alarm will come on again at the same time the
next day.
To De a c t iva t e t he Ala rm
Set the ALARM MODE selector to OFF.
ALARM A or ALARM B indicator go off.
U sing t he N AP
T im e r
(Count Dow n T im e r)
The NAP timer sounds the buzzer after a present time
duration.
Press NAP repeatedly until the desiresd minutes is
displayed.
Each press changes the display as follows:
OFF
(current time)
10
20
30
120
90
60
The NAP indicator turns on,and the NAP time is
displayed for a few seconds. NAP timer starts
counting down the NAP time.
When selected NAP time has passed, the beep sound
comes on, and the NAP indicator flashs.
To Stop NAP Timer
Press NAP or OFF x • ALARM RESET to
turn off the buzzer.
To Deactive NAP Timer
Press NAP.
The NAP indicator goes off.
90
60
15
30
Advertisement
