EXTERNAL EQUIPMENT SETUP
CONNECTING WITH A RF CABLE
■ To avoid picture noise (interference), allow adequate distance between the VCR and TV.
Connect the ANT OUT socket of the VCR to the
1
ANTENNA IN socket on the TV.
2
Connect the antenna cable to the ANT IN socket
of the VCR.
Press the PLAY button on the VCR and match the
3
appropriate programme between the TV and VCR
for viewing.
EXTERNAL STEREO SETUP
Use to connected either an external amplifier, or add a subwoofer to your surround sound system.
Connect the input jack of the stereo amplifier to
1
the VARIABLE AUDIO OUT jacks on the TV.
Set up your speakers through your analog stereo
2
amplifier, according to the instructions provided
with the amplifier.
NOTE
►When connecting with external audio equipments,
such as amplifiers or speakers, please turn the TV
speakers off.(► p.67)
6
1
Wall Jack
2
Antenna
1