Triple screen laptop monitor extender with 360 rotation stand - (20 pages)
Summary of Contents for MAXFREE T2
Page 1
T2 USER'S GUIDE Pay attention to the switching sequence of the screen 1. Please install the included display driver provided. Briefly turning off your anti-virus software to allow the installation may be required. 2. Ensure that all connected cables are secure and not loose before usage.
Installation and Storage 1. Unfolding Sequence 2. Releasing the Holding Clamp 3. Using the Kickstand 4. Connecting the T2 5. Driver Installation for Laptops 6. Driver Installation for Mobile Phones 7. Disassemble the T2 8. Cable Connection Methods if Additional Power is Required Display Settings for Win10/MacOS 1.
13.4” x 8.4” x 1.6” 5-20V /3.5A MAX Refresh Rate: Type-C Output: 60Hz 5-20V /3A MAX Resolution: 1920x1080p I/O Ports: Type-C + microSD Carefully check package contents, if anything is missing or damaged, please contact Maxfree customer service for support: support@maxfree.com...
2. Releasing the Holding Clamp Press the Lock Switch button (two small triangular icons), the T2 screen will pop up directly, and then adjust T2 to a suitable size. Note: Lightly press the lock button, and the spring-loaded holder will extend.
Option 2: If your laptop's Type-C output port cannot provide more than 5V/2A power, or the monitor has no signal/signal instability after connecting. Then you need to use two Type-C cables, one to connect T2 and the laptop, and the other to connect an external power supply(Over 5V/2A) and the PD port of T2.
If your laptop does not have a Type-C port Option 3: There is a cable in the package: Type-C to USB*2. Connect the laptop to the T2's Type-C port via the black USB port. If your laptop's USB port cannot output more than 5V/2A power, then use the red USB port connects to an external power supply with more than 5V/2A power(Adapter).
Note: Open the mobile phone file management app and install the device driver accordingly. Please note that not all mobile phones will support external display USB tethering. 7. Disassemble the T2 After use, remove all the connecting wires, find the end with the "+" and "-" signs facing us, and the screen is facing up, first close the left screen, and then close the right screen (note: the order...
Display Settings for Windows 10/MacOS 1. Windows 10 Display Settings and Configuration 1. Right-click a blank area of the desktop. In the pop-up dialog box, select “Display Settings”. to open the dialog settings box as shown: Sleep better Night light can help you get to sleep Select a display below to change the settings for it.
Display Settings for Windows 10/MacOS 2. MacOS Display Settings and Configuration 2.1 Video output switching settings on the MAC laptops 2.2 Click the laptops "Settings" icon 2.3 Select "Display" in the pop-up dialog box and a display box as shown in the figure will pop up. The user can set the display Output.
Display Settings for Windows 10/MacOS 3. MacOS Monterey Display Settings and Configuration 3.1 Enter the “System Preferences” menu 3.2 Select "Displays” in the dialog box and a pop-up box as shown in the figure below will show. The user can now configure their displays to their liking. 3.3 In this menu, the user can adjust the orientation of the device by clicking and dragging the windows to their desired positions.
OSD Settings 1.Button Operation Guide Note: Press the"-" to display the OSD menu on the left screen Note: Press the "+" to display the OSD menu on the right screen Note: Press the Power Button for 2 seconds to switch the machine on and off Button Operation Functions...
8. Disconnect any power cables when the device is not in use. 9. The maximum folding angle of the T2 is 207 degrees. When at the maximum angle, the screen should not be further bent or squeezed to avoid damage.
8. Are there alternative connection options available apart from Type-C for the T2 device? A: The alternative connection option available for the T2 device is to use a Type-C to Dual USB data cable for connectivity. but HDMI connection is not supported.
Page 15
9. Where can I find the appropriate driver for this display? A: The corresponding driver file can be found on the TF card provided with the T2. Make sure the data cable is correctly connected to the product. If the TF card cannot be recognized, please connect an external power supply to the product's PD interface.
Need help?
Do you have a question about the T2 and is the answer not in the manual?
Questions and answers