Table of Contents
Advertisement
General Description
The Sentry® SBC controller is a dedicated logic control system capable of controlling many automatic samplers in the
Sentry product line including liquid, slurry, and bulk solids samplers .
Controller features
ƒ Adjustable timer setpoints for all Isolok models
ƒ Standard modes of operation include Hand and Auto sampling
ƒ Continuous timed sampling
General Specifications
ƒ Operating temperature: -4°F (-20°C) to 131°F (55°C)
ƒ Relative humidity: 93% non-condensing
Receiving
ƒ Examine the crate and all contents for any shipping damage immediately after receipt .
ƒ Take pictures of any suspected damage .
ƒ Report damages to the delivery company at once . This is the responsibility of the consignee .
Shipping Handling & Storage
1. Overseas shipments will have the controller packaged per international standards .
a. The controller contains electrical components . It requires storage temperatures of 32°F to 122°F (0°C to 50°C) .
b. Dimensions and mass will change per enclosure type . Refer to the specific drawing set for more details . The
typical box will be a nominal 10 x 8 (254mm x 203mm) and weigh approximately 7lbs (3 .2kg) .
c. Utilize the proper PPE equipment while moving, handling, and installing this equipment .
d. Handling of the junction box requires two hands and proper lifting techniques . Mounting feet are provided for
the convenience of wall mounting .
e. Unless otherwise specified, the junction box is rated for NEMA type 4, 12, 13, and IP66 . Nema 4x can be achieved
with stainless steel or plastic based boxes .
6
Original Instructions
Sentry Equipment Corp
Advertisement
Table of Contents
