Table of Contents
Advertisement
General Safety Precautions
Product Selection, Installation, and Use
Improper selection, installation, or use can cause personal injury or property damage . It is solely the responsibility of users,
through their own analysis and testing, to select products suitable for their specifi c application requirements, ensure they are
properly maintained, and limit their use to their intended purpose .
Follow proper local, state, and federal regulations for proper installation and operational requirements .
Always use caution and common sense when working with any chemical . Read the product label and Material Safety Data
Sheets (MSDS) carefully and follow the instructions exactly .
Firefi ghting
When selecting the appropriate fi refi ghting apparatus, the fi re extinguisher shall be rated for electrical service and meet the
requirements for the materials being sampled .
Potential Equipment Hazards
Hot surfaces! This equipment may have very hot surfaces . If an operator contacts a hot surface, injury may occur . Use
protective clothing to prevent injury . If other equipment comes in contact with a hot surface, damage to the equipment may
occur . Ensure the area around this equipment is kept clear to prevent damage from occurring .
High pressures! This equipment may contain fl uids at very high pressures . Prior to installing, removing or maintaining this
equipment, ensure that the equipment is isolated from all connecting piping, the equipment is depressurized, the contents
have been drained, and the equipment is cool .
Moving parts! This equipment may contain moving parts . All drive guards and doors must be secured in place when this
machine is being operated .
Sentry PRO-TEC Controller
Original Instructions
5
Advertisement
Table of Contents
