BYD SEAL Owner's Manual page 89

Open the vehicle charge port cap,
●
and make sure that no obstacles exist
between the head of the charging
connector and the end of the charging
socket.
REMINDER
Do not open the charge port door
●
forcibly when it is locked.
If the charge port door is frozen
●
due to weather or other reasons,
do not force it open.
Connect the power supply terminal:
●
Insert the EV Mode 2 Charging Cable
●
power plug into a household socket.
Connect the vehicle port:
●
Insert the charging connector into
●
the vehicle socket.
After the charging connector inserted,
●
the charging connection indicator
on the instrument cluster or
infotainment screen lights up.
REMINDER
Do not forcibly insert the
●
connector with the electric lock
engaged.
In the charging process, the instrument
●
displays relevant charging parameters
and the charging sign.
88
At this point, you can schedule
●
charging on the Infotainment system.
See "Charging Reservation" for the
setup process.
REMINDER
During charging, the estimated
●
remaining time to full charge
is displayed on the instrument
cluster or infotainment system. It
is normal that the remaining time
to full charge may vary slightly
depending on the temperatures,
SOC, and charging facilities.
Reserve charging function cannot
●
be used when the remaining
battery is too low.
3. Stopping charging
End the charging:
●
The charging automatically ends
●
when the vehicle is fully charged.
Press the unlock button on the
●
smart key or press the door
handle microswitch (when the key
is nearby), the vehicle will stop
charging.*
Disconnect the charge port:
●
If the anti-theft mode of the electrical
●
lock is deactivated, directly press the
mechanical button of the charging
connector and pull out the charging
connector (choose according to the
actual situation).
If the anti-theft mode of the electrical
●
lock is active, press the unlock
button on the key or press the
microswitch on the door handle
(when the key is nearby), then
press the mechanical button of the
charging connector to pull out the
charging connector.