Advertisement
8. Level and secure the
dishwasher
To ensure the stability of the dishwasher,
it must be screwed to the continuous
worktop after it has been positioned.
Fit the securing pieces into the slots
on both the left and right hand sides,
(see arrow).
Push the dishwasher into the recess.
Open the dishwasher door.
The hole in the securing piece must
line up with the oval hole in the niro
steel plate.
Screw the countersunk screws
(3.9 x 22) upwards through the se-
curing pieces on the left and right
hand sides into the work surface to
secure the dishwasher.
Ensure that the seal on the top
edge of the dishwasher fits directly
against the worktop. If this is not the
case, adjust the height-adjustable
scre feet more, (see Step 2 in the In-
stallation section of the Operating In-
structions).
With 'Corian' or granite-type worktops
consult the Section on installing inte-
grated 'i' dishwashers in the Operating
Instructions booklet.
Q
15
Advertisement
