Honda PASSPORT 2023 Owner's Manual page 84

Indicator Name
Malfunction
Indicator Lamp
Charging System
Indicator
Gear Position
Indicator
M (sequential
mode) Indicator/
Sequential Mode
Gear Selection
Indicator
On/Blinking
• Comes on when you set the
power mode to ON, and goes off
when the engine starts, or after
several seconds if the engine did
not start. If "readiness codes"
have not been set, it blinks five
times before it goes off.
• Comes on if there is a problem
with the emissions control system.
• Blinks when a misfire in the
engine's cylinders is detected.
• Comes on when you set the
power mode to ON, and goes off
when the engine starts.
• Comes on when there is a
problem with the charging system.
• Indicates the current gear
selection.
• Comes on when the manual
sequential shift mode is applied.
Explanation
• Readiness codes are part of the on-board
diagnostics for the emissions control
systems.
2 Testing of Readiness Codes P. 591
• Comes on while driving - Have your
vehicle checked by a dealer.
• Blinks while driving - Stop in a safe
place where there are no flammable
objects. Stop the engine for 10 minutes
or more, and wait for it to cool down.
Then, take your vehicle to a dealer.
2 If the Malfunction Indicator Lamp
Comes On or Blinks P. 571
• Comes on while driving - Turn off the
climate control system and rear defogger
in order to reduce electricity
consumption.
2 If the Charging System Indicator
Comes On P. 571
2 Shifting P. 405
2 Sequential Mode P. 411
uuIndicatorsu
Message
—
—
Continued 83