Download Print this page
Trane BAYSQRD001 Installer's Manual

Trane BAYSQRD001 Installer's Manual

Square to round adaptor kit

Advertisement

Quick Links

ALL phases of this installation must comply with NATIONAL, STATE AND LOCAL CODES.
I
MPORTANT — This Document is customer property and is to remain with this unit. Please return to service information
pack upon completion of work.
These instructions do not cover all variations in systems or provide for every possible contingency to be met in connection with
the installation. Should further information be desired or should particular problems arise which are not covered sufficiently for the
purchaser's purposes, the matter should be referred to your installing dealer or local distributor.
Note: The manufacturer recommends installing only approved matched indoor and outdoor systems. All of the manufacture's split
systems are AHRI rated only with TXV/EEV indoor systems. Some of the benefits of installing approved matched indoor and out-
door split systems are maximum efficiency, optimum performance and the best overall system reliability.
Models
BAYSQRD001
BAYSQRD002
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of
heating, ventilating, and air-conditioning equipment can be hazardous and requires specific knowledge and train-
ing. Improperly installed, adjusted or altered equipment by an unqualified person could result in death or serious in-
jury. When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels
that are attached to the equipment.
Installer's Guide
Square to Round Adaptor Kit
WARNING
18-HE79D1-1E-EN

Advertisement

loading

Summary of Contents for Trane BAYSQRD001

  • Page 1 AHRI rated only with TXV/EEV indoor systems. Some of the benefits of installing approved matched indoor and out- door split systems are maximum efficiency, optimum performance and the best overall system reliability. Models BAYSQRD001 BAYSQRD002 WARNING Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning equipment can be hazardous and requires specific knowledge and train- ing.
  • Page 2 Installer's Guide Safety Section HAZARDOUS VOLTAGE! Failure to follow this Warning could result in property damage, severe personal injury, or death. Disconnect all electric power, including remote discon- nects before servicing. Follow proper lockout/tagout procedures to ensure the power cannot be inadver- tently energized.
  • Page 3 Secure with sheet metal screws. See Figure 2. For use with medium 12 cabinet *****042-60 Models - Follow instructions above but leave a 4-1/2” gap. See Figure 2. INSTALL NOTE BAYSQRD001 1” AS ABOVE BAYSQRD002 4- 1/2” LONGER 20.92” SIDE TOP/BOTTOM 5.
  • Page 4 20.92 About Trane and American Standard Heating and Air Conditioning Trane and American Standard create comfortable, energy efficient indoor environments for residential applications. For more information, please visit www.trane.com or www.americanstandardair.com The manufacturer has a policy of continuous data improvement and it reserves the right to change design and specifications without notice. We are committed to using environmentally conscious print practices.

This manual is also suitable for:

Baysqrd002