ViewSonic PX704HD User Manual page 51

Menu
Advanced
Lamp Settings
Direct Power On
Automatically power on the projector when AC power
is supplied, without pressing the Power button on the
projector or the remote control.
Auto Power Off
A countdown timer will start when there is no signal being
sent to the projector. The projector will automatically power
off when the countdown has finished (in minutes).
Signal Power On
Automatically power on the projector when a signal is
detected from the input source, without pressing the Power
button on the projector or on the remote control.
NOTE: The projector will not power on automatically
by HDMI if there is one HDMI cable already
connected.
Exit
Exit the Advanced menu.
Lamp Hour
Displays the lamp hours of the current lamp.
Lamp Reminder
Show or to hide a warning message when the "change lamp
message" is displayed.
Brightness Mode
Option
Bright
Eco
Dynamic
Lamp Reset
Resets the Lamp Hour counter. Should be used after
replacing the lamp.
Exit
Exit Lamp Settings.
51
Description
Description
Highest brightness and power
consumption.
Dim the light output, lowering
power consumption.
Automatically adjust the picture
brightness in order to give optimum
contrast performance.