ASROCK Pro Series User Manual page 71

COMP Setting
Dll Bandwidth 0
Configure Dll Bandwidth 0 (1067 MHz) to maximize the performance of
intergrated memory controller.
Dll Bandwidth 1
Configure Dll Bandwidth 1 (1333 MHz) to maximize the performance of intergrated
memory controller.
Dll Bandwidth 2
Configure Dll Bandwidth 2 (1600 MHz) to maximize the performance of
intergrated memory controller.
Dll Bandwidth 3
Configure Dll Bandwidth 3 (1867 MHz) to maximize the performance of intergrated
memory controller.
Advanced Setting
ASRock Timing Optimization
Configure the fast path through the MRC.
ASRock Second Timing Optimization
Configure the second fast path through the MRC.
Memory Training Mode
Configure the Training Memory Mode.
Realtime Memory Timing
Configure the realtime memory timings.
[Enabled] The system will allow performing realtime memory timing changes after
MRC_DONE.
Reset for MRC Failed
Reset system after MRC training is failed.
Train on Warm Boot
When enabled, memory training will be executed when warm boot.
64