Product Overview; Specifications; Attachments/Accessories; Operation - Toro SnowMaster 724 ZXR Operator's Manual

Product Overview

1. Auger lever
2. Fuel-tank cap
3. Dipstick
4. Skid (2)
5. Auger
6. Scraper
1. Fuel-tank cap
2. Primer
3. Ignition key
Figure 7
7. Discharge chute
8. Chute deflector
9. Chute-deflector control
10. Discharge-chute control
11. Upper handle
Figure 8
4. Choke
5. Recoil-start handle

Specifications

Model Weight
53.1 kg
36001
(117 lb)

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.

Operation

g030450
Note:
Determine the left and right sides of the
machine from the normal operating position.

Before Operation

Before Operation Safety

General Safety
•
For electric-start models only: Use extension
cords and receptacles as specified in the manual.
Inspect the electrical cord before plugging it into
a power source. If the cord is damaged, replace
it. Unplug the power cord whenever you are not
starting the machine.
•
Wear appropriate clothing, including eye
protection; long pants; substantial, slip-resistant
footwear; and hearing protection. Tie back long
hair, secure loose clothing, and do not wear loose
jewelry.
g030451
•
Thoroughly inspect the area where you will use the
machine, and remove all doormats, sleds, boards,
wires, and other foreign objects.
•
If a shield, safety device, or decal is damaged,
illegible, or missing, repair or replace it before
6
Length Width
132 cm 64.5 cm
(52 (25.4
inches) inches)
www.Toro.com for a list of all
Height
108 cm
(42.5
inches)