Base - Lenovo 21J8000EGE User Manual

Base

1. Power light/Fingerprint reader light
2. Power button/Fingerprint reader
3. Numeric keypad
4. Touchpad
5. Keyboard
6. Wireless antennas
The light shows power status of the computer. If the computer
includes a fingerprint reader, it can also show the status of the reader.
• Power light
– On: The computer is turned on.
– Off: The computer is turned off or in hibernation mode.
– Blinking: The computer is in sleep mode.
• Fingerprint reader light
– Blinking green: The fingerprint reader is starting.
– Solid green: The fingerprint reader is waiting for you to scan
your fingerprint.
• Press the button to turn on the computer or put the computer into
sleep mode.
• Enroll and read your fingerprint for user authentication.
To enable or disable the numeric keypad, press the Num Lock key.
Perform finger touch and all the functions of a traditional mouse.
Note: The touchpad also supports multi-touch function.
Enter characters and interact with programs.
Note: The keyboard also includes hotkeys and function keys for
changing settings and performing tasks quickly.
Send and receive radio waves for the built-in wireless LAN (local area
network) and Bluetooth module.
Notes:
• The antennas are not visible from the outside of the computer.
• If the location of the antennas is close to the user's body (< 20 cm),
you can find the Specific Absorption Rate (SAR) values in the Setup
Guide that comes with your computer.
.
Chapter 1 Meet your computer
3