Table of Contents
Advertisement
Operating the product
Water supply is cut-off
warning
If the mains water supply is cut off or the
machine water inlet tab is not opened,
water would not flow into the machine
and the E:02 icon will flash on the program
indicator. As long as the error continues,
the washing program is stopped and it is
checked whether the water flows or not
into the machine at certain intervals, when
water flows in, the E:02 icon turns off after
a certain period of time and the washing
cycle resumes.
Water overflow warning
If too much water flows into the machine
or if there is a leak in any part, the machine
will detect an overflow and the E:01
icon will flash on the Program indicator.
As long as the overflow continues, the
safety algorithm will operate and try to
discharge the water in the machine. If the
overflowing stops and the safety procedure
is completed, the E:01 icon will turn off. If
the E:01 icon does not turn off, the error is
permanent and you should call the service.
InnerClean
(depends on the model)
This programme is recommended to be
operated on each 1-2 months for machine
cleaning and necessary hygiene. The
programme should be operated while the
machine is empty.
In order to achieve an efficient result, it is
recommended to use together with special
machine cleaning agents.
C
Do not use this programme to
clean dishes. As it operates in
high temperatures, it is harmful
for the dishes.
36
/44 EN
/
Advertisement
Table of Contents
