Table of Contents
Advertisement
Warranty
Terms: Unless otherwise stated, Waratah New Zealand
Limited ('Waratah') warrants each new attachment to be
free of failure caused by defective material or workmanship
for a period of one (1) year or two thousand (2000) hours,
whichever first occurs, following date of delivery of the
product to the original retail customer (user).
Warranty coverage for parts on Waratah's forestry
attachments is for 12 months from the date of installation
by a Waratah-approved dealer, or 180 days from the date
of delivery if the customer buys the part over the counter.
Interruptions: Only one warranty interruption, lasting no
more than six (6) months, will be accepted during the
warranty period.
Validity: To validate this warranty, attachment installation
must be done by an authorised dealer on a carrier that
meets Waratah's specifications, prescribed pre-delivery
and start-up inspections must be completed, and the
customer must complete, sign, and submit a Warranty
Registration Form to the selling Waratah Distribution
Centre (WDC).
Obligations: Waratah's sole obligation under this
warranty is limited to repairs of failures due to faulty
workmanship, or the repair or replacement of defective
parts. These actions are without charge, whether in the
field, or at Waratah's factory, warehouse, or an approved
repair shop. Return freight of parts must be pre-paid
by the user. Waratah is not responsible for any costs
associated with the delivery of an attachment or its parts
for repairs, or any costs associated with the delivery of
parts to make repairs.
Avoid Unauthorised Machine Modifications
Unauthorised changes to a Waratah product could affect
its integrity and its ability to perform as intended.
No changes should be made to any Waratah product
other than Waratah-approved options fitted by authorised
personnel in a factory-approved manner, as described
in product literature issued by Waratah. WDCs can also
provide written approval for modifications, at Waratah's
discretion.
Any unapproved modification, and any unapproved
adjustment to an attachment or part thereof that falls
outside published specifications, voids the warranty. It
General
Exceptions: This warranty does not apply to software.
It does not apply to maintenance items used in service
(such as lubricating oils and filters) and consumable parts
(such as blades and saw chains). It does not apply to
products that show evidence of neglect, overload, abuse,
accident, or unauthorised alteration. It does not apply
to products that are inadequately maintained or used
for other than their designated purposes, as defined in
Waratah's technical and marketing publications.
Annulment: This warranty shall be void if Waratah
determines that the attachment's performance or reliability
is adversely affected by 1) repairs or alterations to the
product made by persons or firms not approved by
Waratah, or 2) installation of the product on a machine
or by persons or firms not approved by Waratah, 3)
replacement parts that are not genuine Waratah parts,
or 4) failure to follow prescribed processes in Waratah
manuals or on Waratah product safety labels.
Liability on the part of Waratah for damages, whether
general, special, or arising through negligence, and
expressly including any incidental and consequential
damages, is hereby disclaimed. Waratah's obligation
to repair or replace is the limit of its liability under this
warranty, and the user's sole right and remedy.
This warranty is expressly in lieu of all other
warranties, express or implied, written or oral, and
including, without limitation, any implied warranties
of merchantability or fitness for purpose.
This warranty may not be changed, altered, or modified in
any way except in writing by Waratah.
also voids the certification on any safety items installed
on the modified equipment, and any warranties by parts
manufacturers. Warranty does not apply to any modified
component.
Waratah disclaims responsibility for any consequences
arising from unauthorised modifications (such as the use of
an unapproved saw bar on a harvester head). Any person
or organization involved in an unauthorized modification is
deemed to have assumed the risks concerned, and may
be legally liable for any consequences.
1-1-2
T7M7G6M,0000573 -19-01SEP20-1/1
DS17474,0000064 -19-05JUL19-1/1
090721
PN=6
Advertisement
Table of Contents
