LG musicflow NP8740W Simple Manual page 20

20 Using Multi-Room
, Note for Multi-Room Setup
y You can make all wireless/wired connection according to the
location of the router. But we recommend that you connect
the first speaker or bridge to the router using LAN cable and
connect additional speakers for network stability.
y When the "Firmware update"pop-up appears on Music Flow
Player App, touch to start updating.
2
y If you connected a speaker with a LAN cable and installed
additional speakers: If there is a speaker with frequent
sound breaking it may not be close enough with the LAN
cable connected speaker, install an additional Bridge or
another speaker in a middle location between the LAN cable
connected speaker and the speaker with sound breaking and
try again.
y Even if you connected speakers with MUSICflow mesh
network, music sound breaks by ambient signal interference
causing Wi-Fi network defect. In this case, you can try to
change Mesh network channel of MUSICflow system at the
[Settings à Advanced settings à Mesh Network Channel]
y When making connection, "Mesh network composition" may
appear and it takes about 30 seconds. This message appears
once in first installation but may appear again when you
change network environment.